Monday, September 15, 2008

Sandown

Second track day for Tyra! I was looking forward to this one for a while (having missed Winton), but the weather wasn't looking promising. Fortunately it turned out to be an absolutely perfect day. Pity my driving wasn't so great.

Not that it was bad mind you, I still cleaned up Standard NB class, with a best of 1:36.3.

But I am still over 1 second off James' outstanding lap record, and I only did 2.5 of 4 sessions after severely flat-spotting a couple of tyres. Not happy. I reckon I could have knocked another 0.5 or so off my best, but there was no point continuing to trash tyres.

From MX-5


From MX-5


From MX-5


From MX-5

Reflectors

Just a small mod I did that has been in the plan for a while... I finally tinted the corner reflectors. Looks good I think. Tempted to do some of the lights (eg centre brake light and side repeaters) but I'm not keen on reducing light output...

From MX-5

Saturday, July 19, 2008

back in black

Ordered (and received a few days later) some black "Pop" plates form VicRoads. Same number. Goes well with the paint colour. The front plate is held on with double sided tape, so that it conforms to the shape of the front bumper better (and does double duty hiding the holes that I put in it the other day ;o)

Now I just have to get rid of the orange bits (reflectors, indicators, etc)...



Also got the stone chip in the windscreen repaired, though it is still quite visible (it just stops it cracking further).

Sunday, July 6, 2008

Phillip Island - Round 1

Back at the track! (at last)





Another great fun day at the track, my first event in at least two years. I thought it might take me a little time to get back into it, but I was straight into the 2:04s and showing up many of the newer club members, teehee. Eventually got down to a 2:03.60 which is a new Vic Club class record for Standard NB. Very happy with that.

Not so happy with a massive stone chip in the windscreen (and bonnet, and bumper...) from some flicked up stones, but what can you do?

The new tyres were excellent, though I was spinning up the inside rear out of corners - really need an LSD to stop this or I'll shred them in no time.
Posted by Picasa

Thursday, July 3, 2008

Holey crap!

Yep, I've done it again! More damage.
Will be opting for the cheapy repair on this one (ie, forget about it and hide it behind the plate)



Saturday, June 28, 2008

Lube and rubber

Had some free hours on the weekend, and I'm off to Phillip Island next week, so last chance to get ready!

Got some new tyres fitted - Hankook Ventus R-S2 Z212 to give them their full title.
Size is 195/50R15, they look very square on the factory 15x6" wheels as you can see above. As soon as I left the tyre shop the wheels were spinning, but that is (hopefully only) due to the release compound doing its thing. All going well they should be scrubbed in by next week.

With Tony busy today, I jacked the car in the street and crawled under to change some fluids.
First, engine oil - I don't think the previous stuff was too old, but at least I have a starting point now. Shell Helix Ultra full synthetic 5W-40.
Then on to the gearbox oil - good to see the gorilla still works at the Mazda factory - those gearbox fill and drain caps were on stupidly tight. It took a BFH to encourage them off. Refilled with 1 litre of Castrol Syntrax and the remainder (nearly a litre) of Castrol ATF - a strange mix admittedly, but ATF is apparently good for curing crunchy shifts (which I have badly on 2nd gear), because it is less viscous and allows the synchros to engage faster. Will find out how it goes soon...
Lastly, I replaced the shifter boots which were torn (see previous post) and topped up the shift tower (with ATF, because the bottle was open).

Dropped the tyre pressure back from 36 psi that the tyre guys had put in it,to something more sensible. Surprisingly not much difference in ride though. Must be some stiff sidewalls here :o)
Posted by Picasa

Sunday, June 22, 2008

I have the Powah!

She's back - at last! Sadly took a week longer than expected, which means I missed out on going to DECA. :o(
Looks good though!


I got her back just in time to go to the club dyno day.
73.7 kW of power, and 1993 Newtons (?) of force (analogous to torque) at the rollers of the Caulfield Jag dyno. This is (as I recall from previous years) pretty much normal for a standard NB, so all is good in that respect.

I have a box full of goodies to fit in the next couple of weeks, I started with some new globes tonight - Phillips BlueVision, the colour seems OK (very white) even if they're not any brighter (which was the aim...).
Posted by Picasa